Repair Parts List - Simer P3010 Notice D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Operation / Repair Parts

OPERATION

Risk of electric shock. Before attempting to

check why a unit has stopped operating, disconnect the

battery from the unit. Do not handle a pump or pump

motor with wet hands or when standing on wet or damp

surface, or in water. Do not use this pump in marine

applications.

1. The shaft seal depends on water for lubrication. Do

not operate the pump unless it is pumping water. The

seal will be damaged if the pump is allowed to run

dry. Pump water only.

2. The pump motor must be connected to a fully

charged automotive, tractor or marine type battery of

the proper voltage, or a direct current, full wave recti-

fying 12 Volt power supply with a filter, to smooth

out any current surges.

3. Do not use a battery charger to power this pump.

BATTERY OPERATION

Fire or Explosion Hazard. Follow the bat-

tery manufacturer's recommendations for the mainte-

nance and safe use of the battery. The battery can cause

a fire if the battery terminals are short circuited. Never

allow the DC terminals to touch each other. Take special

care NOT to touch the battery cable clamps together or

to drop a tool (wrench) across the terminals. This will

"short circuit" the battery.

• Keep sparks and flames away from the battery.

• Use the battery in a cool, dry, well ventilated area.

• Do not allow children to play around the battery.

Severe Burn Hazard. Battery acid is corro-

sive and can cause severe burns and blindness. Do not

spill on skin or clothing. Always wear eye, skin and hand

protection when working with the battery.

For parts or assistance, call Simer Customer Service at