Lupus Electronics Aeon LE800 Manuel Utilisateur page 173

5.9.3 Buzzer & Relay Setup
Item
KEY TONE
Relay Switch Connection
Buzzer Duration
ALARM BUZZER
ALARM RELAY
5.9.4 Spot Setup
The DVR has two modes of video output; one is the main video output, the other is spot
video output. SPOT setup is for controlling orders of channels that the system cycles
through in SPOT mode. User can monitor every channel in the SPOT mode.
Enable/ Disable keystrokes.
Set relay signal to be Normal Close (N.C.) or Normal Open (N.O.).
Set up the duration from 1~999 seconds.
Enable/ Disable buzzer operation when the alarm is triggered for sensor,
motion and vloss (Video Loss).
Enable/ Disable the signal to be sent to the RELAY OUT blocks when the
alarm is triggered for sensor, motion and vloss.
36
Description