Ptz & Rs-485 Setup; System Setup - Lupus Electronics Aeon LE800 Manuel Utilisateur

5.8 PTZ & RS-485 Setup
The DVR allows users to control PTZ functions of your camera. To enable PTZ function,
the 485 cable should be connected to the RS-485 port of DVR.
Item
Enable PTZ
Protocol
PTZ ID
Baud Rate

5.9 System Setup

Item
Click the box to Enable/Disable PTZ function for each channel.
Set up the protocol of PTZ cam. The supported protocol are PELCO-P,
PELCO-D, and KND
Click or press ◀ ▶ to set up PTZ ID. The valid ID value is from 1 to 64.
Select Baud Rate for PTZ from 2400、4800、9600
32
Description
Description