Motion Setup - Lupus Electronics Aeon LE800 Manuel Utilisateur

5.3.1 Motion Setup

Item
Motion Detection
Motion Popup
1 2 3 4
Selected Channel Turn
Object Size
Sensitivity
Motion Area Setup
5.3.1.1 Motion Area Setup
There are 16x12 partitions in motion detection area. Under initializing status, motion
detection area is in the entire screen. Red colored area is detected; yet the
undetected area is transparent. It is purple while network is connected.
Item
LOCK / ZOOM
MUTE / PIP
Check the box to Enable/ Disable Motion Detection for all channels.
Check the box to Enable/ Disable popup screen function for all channels.
When motion is detected in LIVE mode, the detected channel image will
popup in full screen display.
You can setup independently for each channel.
Check the box to Enable/ Disable motion detection for each channel.
Drag the white bar or press ◀ ▶ to set up Object Size from value 1 to 15
for each channel. The lower value you set the higher sensitivity it will be.
Drag the white bar or press ◀ ▶ to set up Sensitivity from value 1 to 15 for
each channel. The lower value you set the higher sensitivity it will be
Enter to setup motion detection area
Press LOCK / ZOOM to select the entire screen as detection area.
Press MUTE / PIP to deselect the entire screen as detection area.
23
Description
Description