Sensor Setup; Schedule Setup - Lupus Electronics Aeon LE800 Manuel Utilisateur

STATUS
Switch between "select" and "deselect" for cursor-dragging function
ENTER
Press to activate selected area with assigned status
MENU
Press to save the setup and leave
ESC
Press to cancel the setup and leave

5.3.2 Sensor Setup

Item Description
Sensor Detection
Check the box to Enable/Disable sensor detection for all channels.
Sensor Popup
Check the box to Enable/Disable popup screen function for all channels.
When Sensor is detected in LIVE mode, the detected channel image will
pop up in full screen display.
Sensor Polarity
Click or press ▼ to select between HIGH/ LOW voltage for triggering
sensor detection or OFF to turn off polarity for each channel
Low Polarity：Sensor has not been triggered. When connected, sensor
will be turned on.
High Polarity：Sensor has been triggered. When connected, sensor
status will be turned off.
Off：Sensor is deactivated, and will not be turned on/off.

5.4 Schedule Setup

Apart from manual recording, you can also setup the recording time by weeks and
24