Event Setup - Lupus Electronics Aeon LE800 Manuel Utilisateur

5.2.1 Quality & Frame Rate Setup
Item
Resolution
Record Type
No.
Quality
FPS

5.3 Event Setup

Item
Alarm Duration (Seconds)
Motion Setup
Sensor Setup
Choose record resolution, this value will be used by all channels.
You can setup quality and FPS separately for record type.
Check/ uncheck the box will enable/ disable recording of that channel.
Choose from Lowest/ Low/ Normal/ High/ Highest.
Choose recording frame rate.
Set up alarm duration in seconds (can not be set to 0 seconds).
Drag the white bar or press ◀ ▶ to adjust value.
Enter to set up motion detection
Enter to set up sensor detection
22
Description
Description