Record Setup - Lupus Electronics Aeon LE800 Manuel Utilisateur

ENTER ENTER
ENTER ENTER

5.2 Record Setup

Item
HDD FULL
Schedule - Record Normal
Schedule – Record Motion
Schedule – Record Sensor
Pre-Alarm Record
Audio Record
Video Preservation
Quality & Frame Rate
Setup...
Enter the menu, or display virtual keyboard
Select STOP to stop recording or OVERWRITE to reuse the HDD when
HDD is full.
[Stop] ： Stop Recording
[Overwrite] ： Start to overwrite beginning from the oldest data of HDD,
and continue to record.
Enable/ Disable normal recording
Enable/ Disable recording while Motion is detected
Enable/ Disable recording while Sensor is triggered
Enable/ Disable pre-event recording while motion or sensor is triggered
but not in the recording mode. This option decides if save the
pre-recording time 10 seconds data or not.
Enable/ Disable Audio recording.
Information stored within the HDD is preserved for only a specified length
of time.
Setup the quality and frame rate for each channel under normal
recording and event recording type.
21
Description