Before Starting - Samsung DVD-VR375 Manuel D'utilisation

BASIC VCR RECORDING

Before starting

Check the remaining time on the tape.
You can record a TV show in progress by inserting a blank tape and pressing the ● (REC) button. You can
even add time in preset increments up to 4 hours by pressing the ● (REC) button repeatedly.
M

Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape.
J

Warning : Do not cover this opening unless you are sure you want to record over the tape.
1. Insert a blank VHS tape into the VCR deck.
•
Make sure the tape is long enough to record the entire program.
2. Press the CH/TRK buttons or number buttons to select the desired channel.
Press the INPUL SEL. button to sellect AV 1, AV 2 or CH if recording from an external device connected
to the input jacks of the recorder.
3. Press the REC SPEED button on the remote control to set the Record Speed to one of the following options:
•
SP – Standard Play, for best picture quality.
•
EP – Extended Play, for maximum recording time (3 times SP).
M

The selected Record Speed will appear on the front panel and have on-screen displays.
Maximum Recording Time - SP vs. EP
Tape Length
T-120
T-160
T-180
M

When you watch or record on the VCR during DVD Recording, some function buttons may not operate.
The message "This function is not available." will be displayed.
4. Press the (REC) button on the remote control or front panel.
For options while recording is in progress, see "Special Recording Features".
5. Press the STOP button to stop or fi nish a recording in progress.
SP (Standard Play)
Approx. 2 hrs
Approx. 2hrs 40 mins
Approx. 3 hrs
EP (Extended Play)
Approx. 6 hrs
Approx. 8 hrs
Approx. 9 hrs
English _65