Auto Repeat - Samsung DVD-VR375 Manuel D'utilisation

system setup
VCR FUNCTION SETTING
This function allows you to set up the VCR.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
Press the ▲▼ buttons to select Setup, then press the ENTER button.
2.
Press the ▲▼ buttons to select Features, then press the ENTER button.
3.
Press the ▲▼ buttons to select VCR Function, then press the ENTER button.
4.
Press the ▲▼ buttons to select the desired VCR option below, then press the ENTER button.
5.
Press the ▲▼ buttons to select the desired item, then press the ENTER button.
6.
Tape Length
This information is usually printed on the tape box. The menu cycles
through : T120, T160, T180. Once the cassette type is set, the VCR
can display the amount of time remaining on the tape when you
press the INFO button.
Auto Play
If you want your video tapes to play automatically when you insert
them, turn on Auto Play.
•
On : The VCR will automatically begin playing a video tape
when it is inserted, as long as the safety tab of the
cassette has been removed.
•
Off : Auto play is disabled.

Auto Repeat

It sets the VCR to play a tape repeatedly (unless a tape control is
activated : Stop, Fast Forward or Rewind).
•
On
•
Off
44_ system setup
VCR Function
✔
Title List Tape Length : T120 T120
T160
Auto Play : On
Timer
T180
Auto Repeat : Off
Edit
Dubbing
Disc
Setting
Setup
> Move sEnter rReturn
VCR Function
Title List Tape Length : T120
✔ On
Auto Play : On
Timer
Off
Auto Repeat : Off
Edit
Dubbing
Disc
Setting
Setup
> Move sEnter rReturn
VCR Function
Title List Tape Length : T120
Auto Play : On
Timer
: Off On
Auto Repeat
✔
Edit Off
Dubbing
Disc
Setting
Setup
> Move sEnter rReturn
12:00 AM
eExit
12:00 AM
eExit
12:00 AM
eExit