Cleaning The Rotary Brush - SOLAC AE2501 Mode D'emploi

turning it to the left as indicated by the arrows
and extract. (Fig.5)
- Remove the filter from its housing, clean it and
if necessary change it. (Fig.6).
- To reassemble the filter, proceed with the
above instructions, in reverse order.

CLEANING THE ROTARY BRUSH:

- To remove the brush:
- At the bottom of the shoe, turn the rotary knob
to the left to unclog the brush. (Fig.7).
- Remove the brush and clean.
- To reassemble, follow the above instructions
but in reverse.
SUPPLIES
- Supplies can be acquired from distributors
and authorised establishments (such as filters,
etc...) for your appliance model.
- Always use original supplies, designed specifi-
cally for your appliance model.
- These supplies are available in specialist
shops.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
- CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
- CAUTION: the appliance must be disconnect-
ed from the supply mains when removing the
batteries.
TO REMOVE THE BATTERIES, ONCE THE
LIFE OF THE APPLIANCE, PROCEED AS
FOLLOWS:
- Presionar el botón de extracción de la batería y
estirar la batería fuera del cuerpo del aspira-
dor. (Fig. 8)