Sony FVP-1/1E Mode D'emploi page 83

When you select "VIDEO
MOTION"
When you set INPUT
SELECT to "VIDEO
MOTION," the selected
image is blur-
compensated in step 2.
Re-selecting the image
Press CLEAR ALL. The
selected image is removed
and the printer returns to
stand by mode.
Perform printing
procedures from the
beginning. You can also
press CAPTURE again
while the MEMORY
indicator is flashing to
reselect the image.
When you set to split
printing with the same
images, you can also
press PICTURE to display
the input picture, then re-
select a new image.
2
Select the image.
• When selecting the same image for all the split
planes:
1 Turn on the video
equipment and start
playback.
2 Press CAPTURE when the
picture you want to print
appears on the screen.
The memory image is
displayed in the split
planes selected in the step
1.
• When selecting the different images for each split
plane:
1 Turn on the video equipment and start
playback.
2 Press CAPTURE when the picture you want to
print appears on the screen.
The memory image is displayed in the first
plane of the split planes selected in the step 1.
3 Press PICTURE so that the input picture
appears in the screen.
4 Repeat steps 2 to 3 until you select images
for all split planes.
The selected pictures are allocated as follows:
upper left n upper right n lower left n
lower right.
When you select 4-split printing
3
Press PRINT.
The print indicator flashes while printing, and the
selected image is printed.
When you select 4-
split printing
Making Various Prints
29 GB