Philips PulseRelief PR3840 Mode D'emploi page 23

2 Insert the micro-USB plug of the adapter cable
into the micro-USB socket of the device.
3 Insert the USB plug into the socket of the
adapter and insert the adapter into a wall socket.
Note: Insert the USB plug into a wall socket that
is properly accessible so that the USB plug can be
removed easily. The device is only connected to the
mains during charging.
, The battery indicator is solid orange during
charging. When the battery is fully charged, the
battery indicator turns solid green.
4 Remove the micro-USB plug from the micro-
USB socket of the device.
Note: The USB socket may only be used for charging
with the adapter supplied or for connecting the cable
that connects the two units. Do not use this socket for
any other purpose.
5 Reconnect the cable that connects the two
units by inserting the device connector into
the micro-USB socket of the device.
Installing and setting up the Treatment App
You need the Philips Treatment app to operate the
device. Please go to the Apple App Store or GooglePlay,
search for the 'Philips Treatment' app and press install.
Refer to the quick start guide for more details.
Note: The Treatment App is an app that can be used
for PulseRelief (PR3840) and BlueTouch (PR3733).
The installation procedure is the same for both devices.
ENGLISH
23