After Use - Philips PulseRelief PR3840 Mode D'emploi

ENGLISH
32

After use

Caution: Make sure that you end the treatment in
the app or press the on/off button to switch off
the device before you remove the device or the
electrodes. If the treatment has not ended when
you remove the device or the electrodes, you may
experience an unpleasant sensation in your fingers
when you touch the connectors. This sensation is
not harmful, but can be unpleasant.
1 Press the on/off button to switch off the
device.
2 Detach the device from the electrodes by
pulling it off.
Note: If you forget to switch off the device, it will switch
off automatically 5 minutes after you detach it.
3 If you have used the device quite frequently
during the day, it is advisable to recharge it
before your next treatment.
4 Peel the electrodes off the skin by pulling at
the edge.
Note: You can leave the electrodes at the same spot as
long as the treatment is effective and no skin irritation
occurs underneath the electrodes. If treatment at a
spot is no longer effective or skin irritation occurs, move
the electrodes to a different spot.