Using The Device - Philips PulseRelief PR3840 Mode D'emploi

ENGLISH
24

Using the device

Attaching the electrodes and the device
1 Make sure that the skin you want to place the
electrodes on looks healthy and is free from
wounds or rashes.
For TENS: Do not place the electrodes on red
or inflamed skin and skin with open wounds,
cancerous lesions or rashes.
For EMS: Only place the electrodes on healthy,
uninjured muscles.
2 Clean the skin with a moist cloth and dry it.
The skin you want to place the electrodes
on must be dry, clean and free from cream or
lotion.
Note: Dirt, grease or particles left on the skin may
lodge themselves in the hydrogel of the electrodes. This
has an adverse effect on the adhesive power of the
electrodes.
3 Take the electrodes from the plastic bag and
check them for damage and signs of wear.
Caution: Do not use electrodes whose use-by
date has expired. The use-by date is shown on the
resealable plastic bag.
Note: Replace the electrodes when they are damaged
or dirty, when they have lost their adhesive power or
when stimulation becomes uncomfortable, i.e. when you
experience an unpleasant stinging or biting sensation.