Package Contents; Features & Specifications - Lindy 39380 Manuel Utilisateur

User Manual
Introduction
Thank you for purchasing the LINDY Fibre Optic KVM Extender! This product has been designed
to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free
lifetime technical support. To ensure correct use, please read this manual carefully and retain it
for future reference.
The Fibre Optic KVM Extender allows you to extend DisplayPort 4K and even higher resolution
signals as well as USB 2.0 signals up to 200m using MPO/MTP fibre cable.

Package Contents

 LINDY Fibre Optic DisplayPort Extender (1x Transmitter, 1x Receiver)
 2x Multi-Country wall mount power supply 100 - 240VAC / 5V DC, ~3A, with 4 mains adapter
for worldwide use (Euro, UK, US, AUS/CN)
 This User Manual
Features & Specifications
 Extends DisplayPort and USB 2.0 signals up to 200m
 Supports DisplayPort 1.4 and resolutions up to theoretically 7680x4320, HBR3, up to 8.1Gbps
per lane
 Supports DisplayPort MST function to attach multiple monitors via MST hub and active
Eyefinity/Collage/Surround DP converters
 USB supports almost all USB devices except isochronous ones – webcams and audio
adapters may show incompatibilities and the USB function to fail completely
 Supports USB data rates up to 11Mbyte/s. net, approximately ¼ of the USB 2.0 data rate
 Auto power save mode when source device is powered off
 Auto Laser disable if fibre cable is broken or removed
 Uses standard MPO/MTP OM3 Fibre Cable, 12 core method A 1:1
Installation
Pre-Installation Remarks
USB 2.0, DisplayPort and DisplayPort Active adapter cables as well as MPO/MTP cables in
several standard lengths up to 200m can be obtained from LINDY – please check on LINDY
website. For any other tailor made length of the MPO cable please contact LINDY support.
DisplayPort cables should not be longer than 2m, especially for very high resolutions.
Important! Do not bend the MPO fibre cable beyond its minimum bend radius, otherwise the
cable gets irreversibly damaged. Ensure the connectors are always protected from dust. Do not
put heavy load on the cable and regard the maximum tensile force.
Before starting the installation, please ensure that all devices are powered off.
1. Connect your DP and USB source to the Transmitter.
2. Connect your DP output device and USB devices to the Receiver.
3. Remove the Fibre Optic dust covers from the Transmitter and Receiver ports and from your
Fibre Cable – please keep all dust covers in a secure place to protect the ports in case you
English