Télécharger Imprimer la page

Package Contents; Technical Specifications - Lindy 42693 Manuel Utilisateur

Masquer les pouces Voir aussi pour 42693:

Publicité

Les langues disponibles

Les langues disponibles

Introduction
Thank you for purchasing the LINDY USB 2.0 Cat.5 Extender. The USB Cat.5 Extender
is composed of a transmitting and receiving unit, and enables any USB host device to
send data up to 50 metres. In addition, by adding an additional USB Hub several USB
devices can be connected.

Package Contents

Transmitter/Local Unit
Receiver/Remote Unit
Multi-Country Power Supply
LINDY Manual
Features
Supports USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices
Operates with USB 2.0 high speed host controllers and USB 1.1 classic hosts
Further devices can be connected by connecting an additional USB hub
True plug and play without any driver installation
Compatible with all USB equipped computers
Supports distances up to 50 meters using Cat.5/6 cables
LED indicator
Power supply for remote unit included

Technical Specifications

Local Unit: 1 x USB 2.0 A male, 1 x RJ45 female
Remote Unit: 1 x RJ45 female, 1 x USB 2.0 A female
Power Supply: 5V / 2A
Dimensions (mm): 60 (W) x 30 (D) x 20 (H)
Operating Temperature: 0° ~85° C
Installation
Transmitter:
Plug the USB A plug of the Transmitter into a USB A female port of your PC or
laptop
Connect a Cat.5/6 cable up to 50 metres long with the other end connected to the
RJ45 port on the Receiver (see below)
Receiver:
Connect your USB device such as keyboard, mouse, printer, webcam, hard disk
drive, etc. with a standard USB cable to the USB A female port
Power DC 5V Jack: Plug the supplied 5V 2A DC power supply into the unit and
connect the adaptor to an AC wall outlet.
Connect a Cat.5/6 cable up to 50 metres long with the other end connected to the
RJ45 port on the Transmitter (see above)
2

Publicité

loading