Publicité
Les langues disponibles
Les langues disponibles
Introduction
Thank you for purchasing the LINDY USB 2.0 Cat.5 100m UTP Extender. The USB
Cat.5 Extender is composed of a transmitting and receiving unit, and enables any USB
host device to send data up to 100 metres by use of a UTP network cable. By adding
an additional USB Hub several USB devices can be connected.
Package Contents
•
Transmitter/Local Unit
•
Receiver/Remote Unit
•
Multi-Country Power Supply
•
LINDY Manual
Features
•
Supports USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices
•
Operates with USB 2.0 high speed host controllers and USB 1.1 classic hosts
•
Further devices can be connected by connecting an additional USB hub
•
True plug and play without any driver installation
•
Compatible with all USB equipped computers
•
Supports distances up to 100 meters using a Cat.5 (or higher) UTP cable
•
Power supply for remote unit included
Technical Specifications
•
Local Unit: 1 x USB 2.0 A male, 1 x RJ45 female
•
Remote Unit: 1 x RJ45 female, 1 x USB 2.0 A female, 1 x DC Power Jack
•
Multi-Power Supply included: 5V / 4A
•
Dimensions (mm): 60 (W) x 30 (D) x 20 (H)
Installation
Transmitter:
•
Plug the USB A plug of the Transmitter into a USB A female port of your PC or
laptop
•
Connect a Cat.5 (or higher) UTP cable up to 100 metres long with the other end
connected to the RJ45 port on the Receiver (see below)
Receiver:
•
Connect your USB device such as keyboard, mouse, printer, webcam, hard disk
drive etc. with a standard USB cable to the USB A female port
•
Power DC 5V Jack: Plug the supplied 5V 4A DC power supply into the unit and
connect the adaptor to an AC wall outlet.
•
Connect a Cat.5/5e/6 UTP cable up to 100 metres long with the other end
connected to the RJ45 port on the Transmitter (see above)
2
Publicité
