Brightness; Warranty; Never Open The Device Casing. The Manufacturer Will Not Accept; Technical Data - PERFECTPRO ROCKBULL Mode D'emploi

BRIGHTNESS

LCD brightness configuration
1. Press the ON/OFF button to turn on the radio.
Press the MENU button, and rotate the TUNNING control to the "System settings".
2.
Then, press the TUNNING control;
3. Rotate the TUNNING control to the "Brightness".
4. Press the TUNNING control to enter the LCD brightness adjustment menu.
5. Rotate the TUNNING control to select "Normal" for the LCD brightness level while
the radio is playing;
6. Or rotate the TUNNING control to select "Standby" to setup the brightness level of
the unit in standby mode.
7. Press the TUNNING control to confirm your choice.
Note: When in battery standby, the radio will be turned off to save power. At that
moment, the LCD will also be turned off. When the radio is connected to mains AC
power again, the last user setting will be applied again.

WARRANTY

This radio has a 2 year limited warranty.
WARNING ! Warranty becomes void once the radio cabinet has been opened or
any modifications or alterations to the radio have been made !
The terms of the warranty of this radio do not cover the following:
• Damage caused by misuse, abuse, neglect, alterations, accidents or unauthorized
repair.
• Normal wear and tear.
• Breaking or bending of the metal telescopic antenna
Never open the device casing. The manufacturer will not accept any liability for damage
resulting from improper handling. The type plate is located on the bottom of the device.
21

Environmental note

This product has been manufactured with high quality parts and materials
which can be reused and recycled.
Therefore, do not throw the product away with normal household waste
at the end of its service life. Take it to a collection point for the recycling
of electrical and electronic device. This is indicated by this symbol on the
product, in the operating manual and on the packaging.
Please find out about collection points operated by your local authority.
Help protect the environment by recycling used products.

TECHNICAL DATA

Power supply
Mains operation: AC 230V ~, 50/60Hz
Power consumption
Operation: < 55 W
Standby: < 0.5 W
Frequency coverage
DAB 174,928 – 239,200 MHz
FM 87.50 – 108.00 MHz

Bluetooth

Version 5.0 Supports Bluetooth profiles A2DP and AVRCP
Speaker
Woofer 2 x ø130mm, 4 ohms
Tweeter 2 x ø45mm, 8 ohms
Output Power
Nominal: 2 x 25W
Aux In socket
ø3.5 mm
USB socket
USB type A with 5V/1A power output while in mobile phone charging
GB
GB
22