Equalizer; Language; Software Version; System Reset - PERFECTPRO ROCKBULL Mode D'emploi

EQUALIZER

The EQUALIZER function enables you to select a setting from 12 presets. Each presets
EQ contains a group of parametric controls in the digital audio processor, which offer
you optimum adjustments for various kinds of music and applications for different
environments.
1. Press the ON/OFF button to switch on the radio.
2. Press the EQUALIZER button repeatedly to select the desired EQ. The displayed
EQ will be effective immediately:
• EQ1 Normal
• EQ2 Classic
• EQ3 Dance
• EQ4 Soul and Jazz
• EQ5 Rock
• EQ6 Flat
• EQ7 Small room
• EQ8 Spoken word
• EQ9 Acoustic
• EQ10 Indoor
• EQ11 Outdoor
• EQ12 Late night
3. The display will return to normal in 3 seconds, and resume operation.

LANGUAGE

The radio can be configured to a different language.
1. Press the ON/OFF button to turn on the radio.
2. Press the MENU button, and then rotate the TUNING control to"System settings".
3. Press the TUNING control; rotate the TUNING control to "Language".
4. Press the TUNING control to enter the language adjustment menu.
5. Rotate the TUNING control to select the desired language (default is English).
6. Press the TUNING control to confirm your choice. The display will change to the
chosen language.
19

SOFTWARE VERSION

The software display cannot be altered and is just for your reference. You can only view
the software version in DAB, FM, Bluetooth, Aux In or USB mode.
1. Press the ON/OFF button to switch on the radio.
2. Press the SOURCE button to select any of the modes.
3. Press the MENU button; rotate the TUNING control to "System settings".
4. Press the TUNING control; rotate the TUNING control to "Info".
5. Press the TUNING control to view the software version.
6. Press the MENU button back to the last menu, and press the MENU button again
to return to the normal radio display.

SYSTEM RESET

If the radio fails to operate correctly, or some digits on the display are missing or
incomplete, carry out the following procedure.
1. Press the ON/OFF button to switch on the radio.
2. Press the MENU button;
3. Then, rotate the TUNING control to the "System settings". Press the TUNING
control.
4. Rotate the TUNING control to the "Factory reset". Press the TUNING control.
5. Rotate the TUNING control to select between "Yes" or "No".
Select "Yes" if you wish to reset the radio, otherwise, select "No".
6. Press the TUNING control to cause the factory reset.
7. A full reset will be performed. All presets and the station list will be erased. All
settings will be set to the default values.
The display will show the Perfect Pro logo for a few seconds, and then the radio will
automatically perform an auto scan of the Band III DAB channels and the FM band.
In case of malfunction due to electrostatic discharge; reset the product as above to
resume normal operation. If you are not able to perform the reset operation as above,
remove and reconnect the power supply.

MOBILE DEVICE CHARGE VIA USB

The radio support to charge mobile device via the USB socket. It can provide 5V,
maximum 1A from the USB socket during charge.
GB
GB
20