Structure And Functionality; Functions; Front Wheels; Tines - Alpego PUMA PF Série Manuel D'utilisation Et Entretien

OWNER'S MANUAL OF THE MULCH CULTIVATOR PF-PD

5.1. FUNCTIONS

The Puma is suitable for the following tasks:
• Tilling ground with large quantities of straw evenly and reliably
• Stubble processing without preparatory work
• Ploughing grassland without preparatory work
• Tilling ground for mulch sowing
• Working on seed beds

5.2. FRONT WHEELS

Front wheels are optional devices, although they are recommended in trailed machines.

5.3. TINES

The tine rows are carried by the chassis. The stroke gap is 30 cm.
The chassis height of 75 cm enables large quantities of straw to pass without becoming jammed.
The overload protection, which consists of two compression springs, allows the tines to give way if an overload
situation occurs

5.4. EDGE LEVELLING

For edge levelling a telescopic side disc is used.
Adjustments can be made for soil conditions and operational speed.
The edge leveller not in use is transported on the machine and can be fitted at any time
Open edge livelling disc
Figure 5-2.
Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa

5. STRUCTURE AND FUNCTIONALITY

Figure 5-1. Front side wheel
Closed edge levelling disc
STRUCTURE AND FUNCTIONALITY
Old Cod.Q00A00142
New Cod. MANT2010/00493 R.1
- 17