Spare And Wear Parts And Aids; Ecology; Dangers Of Not Observing Safety Instructions; Safety-Conscious Working - Alpego PUMA PF Série Manuel D'utilisation Et Entretien

OWNER'S MANUAL OF THE MULCH CULTIVATOR PF-PD

3.6. SPARE AND WEAR PARTS AND AIDS

Immediately replace any machine parts which are not in a perfect state.
Use only genuine ALPEGO spare and wear parts or parts approved by ALPEGO to ensure that the operating permit
retains its validity in accordance with national and international
regulations. If you use wear and spare parts from third parties, there is no guarantee that they have been designed
and manufactured in such a way as to meet the requirements placed on them.
ALPEGO accepts no liability for damage arising from the use of unapproved spare parts, wear parts or auxiliary
materials

3.7. ECOLOGY

Regulations in your country regarding the use and disposal of lubricating products; maintenance operations and
cleaning of machine must be respected. Observe carefully the indications given on the packaging of the products
used.
Respect current norms also for scrapping of machine

3.8. DANGERS OF NOT OBSERVING SAFETY INSTRUCTIONS

No observance of the safety information
• Can pose both a danger to people and also to the environment and machine.
• Can lead to the loss of all warranty claims.
Seen individually, non-compliance with the safety information could pose the following risks
• Failure of prescribed methods of maintenance and repair.
• Danger to people through mechanical and chemical impacts.
• Risk to environment through leakage of hydraulic fluid.
• Danger to people through non-secured working areas.
• Failure of important machine functions.

3.9. SAFETY-CONSCIOUS WORKING

Besides the safety information in this operating manual, the national general workplace safety and accident
prevention regulations are binding.
Comply with the accident prevention instructions on the warning pictograms.
When driving on public roads and routes, comply with the appropriate statutory road traffic regulations

3.10. GENERAL SAFETY AND ACCIDENT PREVENTION INFORMATION

3.10.1. GENERAL SAFETY INSTRUCTIONS

•
Adapt the speed to the prevalent conditions
•
Before downhill, change to a lower gear

3.10.2. TRAILED MACHINES

•
Ensure that the tractor has sufficient steering and braking power.
•
Comply with the approved combination options for the attachment equipment on the tractor and the machine
drawbar. Only couple approved combinations of vehicles (tractor and attached machine).
•
In the case of single axle machines, observe the maximum permitted drawbar load of the tractor on the
attachment equipment.
•
Machines connected to a tractor can influence your driving behaviour, as well as the steering and braking power
of the tractor, in particular in the case of single axle machines with the drawbar load on the tractor.
•
The current version of the trailed machine is in course of homologation
Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa
Old Cod.Q00A00142
New Cod. MANT2010/00493 R.1
SAFETY REGULATIONS
- 13