Charging The Appliance - Philips VisaCare SC6240 Mode D'emploi

Masquer les pouces Voir aussi pour VisaCare SC6240:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
10
Charging

Charging the appliance

4222_100_1877_3_DFU-Luxury_A5_v4.indd 10
Note: You can use the appliance before the battery is fully charged.
However, its performance and operating time will not be optimal in this case.
Note: Charging normally takes approximately 8 hours. When the appliance is
fully charged, it has a cordless operating time of up to 30 minutes.
1 Make sure the appliance is switched off.
2 Insert the small plug in the socket of the charging stand and insert the
adapter in the wall socket.
3 Put the appliance in the charging stand.
-
The charging light flashes white to indicate that the appliance is charging.
-
When the battery is fully charged, the charging light lights up white
continuously. After approx. 30 minutes, the charging light goes out to
save energy.
22/01/18 08:28

Publicité

Table des Matières
loading

Table des Matières