Ordering Accessories - Philips VisaCare SC6240 Mode D'emploi

Masquer les pouces Voir aussi pour VisaCare SC6240:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
14
Storage
Replacement

Ordering accessories

4222_100_1877_3_DFU-Luxury_A5_v4.indd 14
3 Clean the tip under the tap with hot water (max. 70°C) and some
washing-up liquid. If the exfoliation ring is dirty, let the tip soak in hot
water with washing-up liquid or in alcohol solution for 5-10 minutes.
You can use the brush to clean it. Make sure you clean the filter of the tip
upside down to rinse off any dirt left in the filter. Dry the tip with a lint-
free towel or leave it to air dry. Place it back onto the handle when
it is dry.
4 Clean the handle with a damp cloth.
5 Place the dry treatment tip back onto the appliance.
6 Wipe the charging stand with a damp cloth.
Danger: Keep the adapter and the charging stand dry. Never immerse
them in water or rinse them under the tap.
Clean the treatment tip after each use for hygienic reasons and to prevent
clogging of the filter. Only use washing up-liquid or an alcohol solution
(max 70%) to clean the treatment tip.
Store the appliance with the tip attached in the charging stand or pouch.
Note: Do not store a wet treatment tip on the appliance or in the pouch.
For optimal results, it is recommended to replace the tips every six months
(or earlier if the abrasive structure is deformed or damaged). Replacement
tips are available on our website. The tip can be identified by the product
code. You can find this code on the inside of the tip.
To buy accessories or spare parts, visit www.shop.philips.com/service
or go to your Philips dealer. You can also contact the Philips Consumer
Care Center in your country (see the international warranty leaflet for
contact details).
22/01/18 08:28

Publicité

Table des Matières
loading

Table des Matières