Using Your Refrigerator; Shelving - AGA marvel 61HK Instructions D'installation, D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Shelving

The unit is shipped with the (2) shelves taped in place in
the lower shelf position. Remove them from the refrigerator
and arrange them as follows when setting up your unit.
Figure 6
If you are not serving beer on tap, your keg dispenser can
be used as a refrigerator by placing both shelves on the
mounting brackets as shown in Figure 7. Install the shelves
so the large (wider) flange is at the front.

USING YOUR REFRIGERATOR

Two shelves
Two shelves
installed
Figure 7
If you are using a quarter barrel of beer, you can add shelf
space for keeping your mugs chilled. The quarter barrel
must set on the floor, it cannot fit on the shelf, see Figure 8.
Be sure the white floor plate is in the bottom of the interior
compartment before positioning the barrel.
Quarter barrel
If you are using a half barrel (keg), place the two shelves
on each side of the keg dispenser on the two mounting
hooks for storage. (See Figure 9). Be sure the white floor
plate is in the bottom of the interior compartment before
positioning the barrel.
Half barrel (keg)
6
Installed shelf
above barrel
Figure 8
White floor plate
Stored shelf
One per side
White floor plate
Figure 9

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

6ohk

Table des Matières