Manual Store; Other Functions; Connecting Peripheral Equipment; The Keys On The Tv Set - Philips 21PT4416 Mode D'emploi

Manual store

This menu is used to store the programmes one
at a time.
H
&
Press the key.
î
é
With the key, select Manual Store and
¬ îÏ
press . Use the
Ȭ
setting and the
Manual Store
Æ
"
System: select
Europe
Other settings in the menu
H
&
Press the key.
îÏ
é
Use the keys to select a setting and the
Ȭ
keys to adjust. :
Brightness
-
• Brightness: this changes picture brilliance.

Other functions

keys to select a
keys to adjust. :
System Europe
Æ
Search 224 MHz
(automatic detection*) or
Brightness
Colour
Contrast
!
Sharpness
+
Balance
Auto Store
Manual Store

Connecting peripheral equipment

Use the euroconnector socket located at the back of the set or the front
AV connections (when available). Certain versions are equipped with
2 euroconnectors EXT1 and EXT2.To select connected equipment, press
several times the
Most equipment (decoder,VCR) carries out the switching itself.
Headphones socket (only available on certain versions)
When headphones are connected, the sound on the TV set will be cut.
@"#
The keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
Amplifier (only available on certain versions)
To connect to a hi-fi system, use an audio connection cable and connect
the "L" and "R" outputs on the TV set to the "AUDIO IN" "L" and "R"
input on your hi-fi amplifier.

The keys on the TV set

The TV set has 4 keys : VOLUME - + (-
To access or exit the menus, press simultaneously the
keys.Then use the - P + and -
Tips : see at the end of the booklet (p. 57).
West Europe (BG standard), East Europe (DK
standard), UK (I standard) or France (LL' standard).
* Except for France (LL' standard), you must select
choice France.
¬
'
Search: press
programme is found, the scanning stops. Go to
the next step. If you know the frequency of the
required programme, this can be entered directly
0 9
using the to
see Tips chapter at the end of the instruction for use.
(
Program No.: enter the required number with
Ȭ 0
the or
¬
§
Store: press
è '
Repeat steps to
!
To quit the menus, press
• Colour: this changes the intensity of the colour.
• Contrast: this changes the difference between
the light and dark tones.
• Sharpness: this changes the picture definition.
• Balance (only available on stereo versions): this
balances the sound on the left and right speakers.
• Auto Store: to start automatic search for all
programmes available in your region.Then, you
need to use the Manual Store menu to
renumber the programmes (see p. 3).
To quit or interrupt the search, press
• Manual Store: see top of page.
"
To quit the menus, press
n
key.
"
"
+ keys to select and adjust.
.The search starts. Once a
keys. If no programme is found,
9
to keys.
.The program is stored.
§
for each programme to store.
d
.
H
.
d
.
+) and PROGRAM - + (- P +).
" "
- and +
5