Manual Store; Other Functions; Connecting Peripheral Equipment - Philips 29PT5408/01 Mode D'emploi

Manual store

This menu is used to store the programmes one
at a time.
H
&
Press the key.
î
é
With the key, select Manual Store and
¬ îÏ
press . Use the
Ȭ
setting and the
Manual Store
$
Manual Store Æ
• Search
• Program No.
• Fine Tune
• Store
"
System: select
Europe
(BG standard), East Europe (DK
West Europe
Other settings in the menu
H
&
Press the key.
îÏ
é
Use the keys to select a setting and the
Ȭ
keys to adjust. :
Í
Brightness
!
• Brightness: this changes picture brilliance.

Other functions

keys to select a
keys to adjust. :
Europe Æ
System
(automatic detection*) or
Brightness
Colour
Contrast
Sharpness
..... I ...... 42
Æ
Balance
Rotation
Auto Store
Manual Store

Connecting peripheral equipment

Use the euroconnector socket located at the back of the set or the front
AV connections (when available). Certain versions are equipped with
2 euroconnectors EXT1 and EXT2.To select connected equipment, press
n
several times the
Most equipment (decoder,VCR) carries out the switching itself.
Headphones socket (only available on certain versions)
When headphones are connected, the sound on the TV set will be cut.
@"#
The keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
Amplifier (only available on certain versions)
To connect to a hi-fi system, use an audio connection cable and connect
the "L" and "R" outputs on the TV set to the "AUDIO IN" "L" and "R"
input on your hi-fi amplifier.
The keys on the TV set
The TV set has 4 keys : VOLUME - + (-
To access or exit the menus, press simultaneously the
keys.Then use the - P + and -
standard), UK (I standard) or France (LL' standard).
* Except for France (LL' standard), you must select
choice France.
¬
'
Search: press .The search starts. Once a
programme is found, the scanning stops. Go to
the next step. If you know the frequency of the
required programme, this can be entered directly
0 9
using the to keys. If no programme is found,
see Tips chapter at the end of the instruction for use.
(
Program No.: enter the required number with
Ȭ 0
the or to
§
Fine Tune: if the reception is not satisfactory,
Ȭ
adjust using the
¬
è
Store: press .The program is stored.
! ' è
Repeat steps to
ç
To quit the menus, press
• Colour: this changes the intensity of the colour.
• Contrast: this changes the difference between
the light and dark tones.
• Sharpness: this changes the picture definition.
• Balance : this balances the sound on the left and
right speakers.
• Rotation (if available) : adjusts the angle of the picture.
• Auto Store: to start automatic search for all
programmes available in your region.Then, you
need to use the Manual Store menu to
renumber the programmes (see p. 1).
To quit or interrupt the search, press
"
To quit the menus, press
key.
"
+) and PROGRAM - + (- P +).
"
+ keys to select and adjust.
9
keys.
keys.
for each programme to store.
d
.
H
.
d
.
" "
- and +
3