DS Produkte Z 02211 Mode D'emploi page 14

EN
3. Insert the appropriate cover insert (12 or 8) into the cover:
Always make sure that you use the appropriate cover insert and cutting
insert pair (see the "Items Supplied and Product Overview" chapter)!
14
2. Select a slice or stick cutting insert (9, 10 or 11) and insert
it into the holder (5) for the slice and stick cutting inserts.
The insert (here: 11) must audibly engage.
• First insert the cover insert (here: 12) into the lower slot
(see arrows on the picture) and then place it fully on the
cover.
• Secure the cover insert (here: 12) by turning the catch.
The catch must audibly engage.
4. Finally place the assembled holder (5) for the slice and
stick cutting inserts onto the collecting container.
Your slice and stick cutter is now ready to be used.