Chauvin Arnoux MiniFLEX MA193 Notice De Fonctionnement page 12

MAINTENANCE
The manufacturer cannot accept any responsibility for accidents occurring
following repairs carried out outside its after-sales department or approved
maintenance network.
CLEANING
Disconnect everything connected to the instrument.
Use a soft cloth, dampened with soapy water. Rinse with a damp cloth and dry rapidly
with a dry cloth or forced air. Do not use alcohol, solvents, or hydrocarbons.
Make sure that no foreign body interferes with the operation of the snap device
of the sensor.
METROLOGICAL vERIFICATION
Like all measuring or testing devices, regular instrument verification is
necessary.
This instrument should be checked at least once a year. For checks and calibra‑
tions, contact one of our accredited metrology laboratories (information and contact
details available on request), at our Chauvin Arnoux subsidiary or the branch in
your country.
REPAIRS
For all repairs before or after expiry of warranty, please return the device to your
distributor.
12