Use; Specifications - Chauvin Arnoux Physics Line C.A 865 Notice De Fonctionnement

3.1 Procedure
1. Connect the sensor
2. To switch the instrument on: press on the ON/OFF pushbutton
, the measurement is displayed immediately.
3. Set up the instrument according to the kind of measurements
to be carried out, using the special functions
4. Read off the measured value.
The instrument is powered down by putting switch
the OFF position.
Note:
If the sensor is not connected, OL Is displayed.
If the temperature to be measured is outside of the instrument's
measurement range, then OL is displayed.
3.2 Special Functions
HOLD: When this button is pressed, the thermometer holds
the last measurement displayed.
MAX: The thermometer displays the maximum temperature
value measured.
Measurement range :
-50°C to +199.9°C (-58°F to 199.9°F)
Resolution : 0.1°
Polarity indication: automatic
Precision (23°C ±5°C, 75% HR)
±0.5°C / ±1°F for the entire measuring range
Temperature sensors: Pt 100 Ω
Operating environment
0 to +50°C, < 80% RH
Storage environment
-20°C to +60°C, 0 to 80% RH, without battery
Temperature drift: 0.05°C from 0 to +18°C and from +28 to
+50°C (+32 to +64°F and +82 to +122°F)
Power supply: 9 V battery (type 6LR61 or 6LF22)
Dimensions / Weight: 173 x 60.5 x 38 mm / 190 g with battery
Safety : Cat. III 24 V AC/DC (CEI 664-1, ed. 92)
Electromagnetic Compatibility:
Emission EN 50081-1 Ed. 1992
Immunity EN 50082-1 Ed. 1992

3. USE

(See § 8. Appendix)
(see § 2. Description)

4. SPECIFICATIONS

9
(See § 2) .
or
back in