Sensors; Maintenance; Battery Replacement - Chauvin Arnoux Physics Line C.A 865 Notice De Fonctionnement

The following Pt 100 Ω sensors can be used with the C.A 865
thermometer.
Model
SP10 surface P03.6527.12 -50...+200°C
Sensitive element is spring-mounted to ensure optimal contact even if
the sensor is not placed at right angles.
SP11 needle P03.6527.13 -100...+600°C
For penetration of viscous, thick substances
SP12 air
Suited to all ambient measurements in air.
SP13 liquid
For penetration of viscous, thick substances
!
For maintenance, use only specified spare parts. The
manufacturer will not be held responsible for any accident
occuring following a repair done other than by its After Sales
Service or approved repairers.
6.1

Maintenance

6.1.1

Battery replacement

!
Press on the ON/OFF pushbutton
Take off the cover on the back of the instrument
Replace the worn-out battery with a 9 V battery (type 6LR61
or 6LF22)
6.2 Cleaning the casing
Clean the casing using a cloth lightly dampened in soapy water.
Rinse off with a damp cloth.
!
Do not use solvent.
6.3 Metrological verification
!
It is essential that all measuring instruments are regularly
calibrated.
For checking and calibration of your instrument, please contact
our accredited laboratories (list on request) or the Chauvin
Arnoux subsidiary or Agent in your country.
6.4 Maintenance
Repairs under or out of guarantee: please return the product to
your distributor.

5. SENSORS

Reference Measurement Response
P03.6527.14 -100...+600°C
P03.6527.15 -100...+600°C
6. MAINTENANCE
range time
6 s
7 s
5 s
7 s
10
Dimensions
(mm)
Ø 5 - L = 130
Ø 3 - L = 130
Ø 5 - L = 130
Ø 3 - L = 130