Plege
Vor jeder Reinigung des Handstaubsaugers muss die-
ser ausgeschaltet und vom Ladekabel getrennt sein.
Staubsauger und Zubehörteile aus Kunststoff können
mit einem handelsüblichen Kunststoffreiniger geplegt
werden.
!
Achtung: Keine Scheuermittel, Glas- oder Allzweck-
reiniger verwenden. Staubsauger niemals in Wasser
tauchen.
Technische Änderungen vorbehalten.
Batterie-Ladestatusanzeige
Betriebszustand
Normalmodus
Turbomodus
Akkuladung < 20%
Akku ist leer
Ladevorgang
Akku ist komplett gela-
den
Über- / Untertempera-
turschutz
Funktion Statusanzeige
Anzeige leuchtet grün
Anzeige blinkt schnell
grün
Anzeige blinkt langsam
rot
Anzeige geht aus
Anzeige blinkt langsam
grün
Anzeige
leuchtet
grün
und erlischt nach ca. 2
Minuten
Anzeige leuchtet rot und
erlischt nach ca 10 Se-
kunden.
en
Congratulations on your purchase of a Bosch vacuum
cleaner from the BCS1/BBS1 "Unlimited" series.
This instruction manual describes various BCS1/
BBS1 "Unlimited" models, which means that some of
the equipment features and functions described may
not apply to your model. You should only use genuine
Bosch accessories – these have been specially develo-
ped for your vacuum cleaner to achieve the best possi-
ble vacuuming results.
Please fold out the illustrated pages.
1 Floor nozzle with electric brush
2 2-in-1 furniture brush with upholstery nozzle
3 XXL upholstery nozzle*
4 Adapter*
5 Flexible crevice nozzle
6 Suction tube
7 Fluff ilter
8 Plate ilter
9 Battery status indicator
10 Turbo switch
11 On/off switch
12 Battery*
13 Dust box
14 Dust box release button
15 Charging cable
16 Docking station*
17 Quick charger with additional battery*
Before using for the irst time
1
Fig.
•
Insert the battery into the vacuum cleaner by means
of the guide rail and click it into place.
•
To release the connection, press the release button
and pull the battery out from the back of the appli-
ance.
!
Please note: Charge the battery fully before using it
for the irst time.
Charging
There are three different ways you can charge the bat-
tery – directly using the charging cable (
itted docking station (
Fig.
quick charger.
* Depending on model
8001 108 997 - 980320
2
), in the
Fig.
3
) or using an original
45