SPOT sanindusa 543637111 Mode D'emploi page 58

// MAINTENANCE
Filter cleaning instructions
The SPOT faucet is provided with one stainless steel filter preventing foreign particles to enter the lines.
If the water flow has decreased, this may be because the filter is clogged.
The filter can be cleaned as follows:
1 – Shut-off the water shut off valve.
2 – Disconnect the water supply inlet from the adapter at the solenoid valve housing.
3 – Remove the filter from the adapter and wash it under running water.
4 – Reassemble the parts.
5 – Reconnect the solenoid valve housing and restore the incoming water supply.
6 – Make sure that there is no water leakage.
Care and cleaning of chrome and special finishes
Do not use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like. Use of any prohibited
cleaning or maintenance products or substances could damage the surface of the faucet. For surface cleaning
of faucet us only soap and water, then wipe dry with clean cloth or towel. When cleaning bathroom tile, the
faucets should be protected from any splattering of harsh cleansers.
58//59