SPOT sanindusa 543637111 Mode D'emploi page 56

// FLOW TIME ADJUSTMENT
The next examples show how to program using the adjustment levels:
Example 1: Flow time adjustment to 20 seconds.
At level 1, pulse 3 times (you get 3 seconds). Total: 3 seconds
Wait for the indicator light to blink twice to enter level 2 and pulse once (you get 2 seconds). Total: 5 seconds
Wait for the indicator light to blink three times to enter into level 3 and pulse once (you get 15 seconds).
Total: 20 Seconds
Wait for the indicator light to blink 4 times to leave adjustment mode.
Or also:
At level 1, pulse 5 times (you get 5 seconds). Total: 5 seconds
Wait for the indicator light to blink twice to enter level 2 without pulsing.
Wait for the indicator light to blink three times to enter into level 3 and pulse once (you get 15 seconds).
Total: 20 Seconds
Wait for the indicator light to blink 4 times to leave adjustment mode.
Example 2: Flow time adjustment to 45 seconds.
At level 1, pulse once (you get 1 second). Total: 1 second
Wait for the indicator light to blink twice to enter level 2 and pulse seven times (you get 14 seconds).
Total: 15 seconds
Wait for the indicator light to blink three times to enter into level 3 and pulse twice (you get 30 seconds)
Total: 45 Seconds
Wait for the indicator light to blink 4 times to leave adjustment mode.
Example 3: Flow time adjustment to 60 seconds.
At level 1, pulse 10 times (you get 10 seconds). Total: 10 seconds
Wait for the indicator light to blink twice to enter level 2 and pulse ten times (you get 20 seconds).
Total: 30 seconds
Wait for the indicator light to blink three times to enter into level 3 and pulse twice (you get 30 seconds).
Total: 60 Seconds
Wait for the indicator light to blink 4 times to leave adjustment mode.
56//57