Battery Replacement - SPOT sanindusa 543637111 Mode D'emploi

//

BATTERY REPLACEMENT

When batteries are weak, they may not have enough power to open and close the solenoid valve and as
a security mode, the energy management system of the SPOT tap will emit two pulses to close, stopping
the valve to open.
This way we will avoid the tap to stay opened for lack of energy.
The batteries should be replaced according to the following instructions:
1 – Open carefully the batteries box.
2 – Remove the used batteries.
3 – Substitute the used batteries for new 1.5V batteries (rechargeable batteries can be used).
4 – Make sure that water did not enter the batteries box during the substitution process and then close
the box.