SPOT sanindusa 543637111 Mode D'emploi page 50

// FLOW TIME ADJUSTMENT
Time adjustment can be done by the user.
ATTENTION: read completely this part of the instructions before you begin the process and make sure
you understood all the steps.
You can also ask Sanindusa to regulate the taps with a different standard time when leaving the factory or
you can ask for help at the installation place.
Adjustment levels
The standard 8 second flow time can be adjusted, at the place, to any value in the interval from 1 to 60
seconds, through three programming levels. The blink of the indicator light (red LED) in the lower part of
the lid, indicates the sequential move from one level to the other, without any necessary operation.
Programming at any level will be done by pulses (touches) on the lid.
The following chart shows the number of pulses (touches) that can be done at each level, the pulse equivalence
in seconds and how to recognize what is the adjustment level selected.
50//51