Cconnecting To The Electrical Source - Cassese MACH 1CART Manuel D'utilisation

USER MANUAL
Allen key N.3
Unscrew both
screws of the
drawer panel with a
3mm Allen key.
Then open the
drawer to have
access to the air
pressure regulator
knob.
2.C CONNECTING TO THE ELECTRICAL SOURCE
Connect the
electrical plug of the
MACH 1 CART to a
grounded 220/110V
single-phase outlet.
Prior to perform any maintenance always unplug the machine from the wall socket, if the red button is pushed it will still
leave some alive wires inside the machine. Refer to chapterI.5.A
The machine should be connected to a protected electrical supply according to the laws in your country (surge and earth
protection). Please have a professional electrician checking your installation in case of doubt.
Pull up
pressure
knob and turn it
(clockwise = more
pressure) until the
needle of the air
pressure
reaches
(85p.s.i.).
Figure 2-10
Switch on the MACH1
CART, by rotating the
emergency STOP &
START BUTTON
Figure 2-12
SAFETY INSTRUCTIONS
the air
regulator
gauge
6 bars
(page 21) for satety instructions.
MACH 1 CART
Figure 2-11
Figure 2-13
12