Sources Of Danger; Danger Of Burns; Danger Of Fire; Dangers Due To Electrical Power - CASO DESIGN VC 10 Manuel D'utilisation Original

Please note
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on the unit. Improperly performed repairs can cause considerable dangers.
► Only customer service departments authorized by the manufacturer may carry out
repairs on the device, as otherwise the guarantee entitlements will be null and void in
the event of any subsequent damages.
► Defective components must always be replaced with original replacement parts. Only
such parts will guarantee that the safety requirements are fulfilled. Please note
► Do not leave the device unsupervised when it is in operation.
► When finished, please unplug by grasping the plug and not the cord, to avoid any injury.
► For the correct storage, please slightly close the cover, do not lock, it will deform the
gaskets and affect the machine function.
► Never immerse the device in water or other liquids and do not place in the dishwasher.

2.3 Sources of danger

2.3.1

Danger of burns

Danger
The sealing bar gets very hot. Please observe the following safety notice in order
not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.
2.3.2

Danger of fire

Danger
There is a danger of fire due to the event the device is not used properly. Observe
the following safety notices to avoid dangers of fire:
► Do not set up the device near flammable material.
► Keep this appliance away from sources of heat (gas, electric, burner, heated oven).
2.3.3

Dangers due to electrical power

Danger Mortal danger due to electrical power!
Mortal danger exists when coming into contact with live wires or subassemblies!
Observe the following safety notices to avoid dangers due to electrical power:
► Do not operate this device if it has a damaged cable or plug, if it is not working properly
or if it has been damaged or dropped. If the power cable or plug are damaged, then
they must be replaced by the manufacturer or its service agent in order to avoid a
hazard.
► Do not open the housing on the device under any circumstances. There is a danger of
an electrical shock if live connections are touched and the electrical or mechanical
structure is altered. In addition, functional faults on the device can also occur.
8