Warranty Information - General PalmScope DCS950 Guide De L'utilisateur

• Do not insert or bend the probe by
force. Over-bending any section of the
probe to a radius of less than 2 in.
(50mm) many permanently damage
delicate internal cables.
• Remember to power off The
PalmScope after each inspection
session.
• Do not get water on the LCD.
• Do not bring the camera into contact
with acid, fire or hot objects by using
the probe in a corrosive or extremely
hot environment.
• Avoid getting oil or gas on the camera
head by shutting off vehicles during
inspections.
• If condensation forms inside the
camera lens, let it evaporate before
using the system again.
• Remove the batteries if planning to
store the unit for months or longer.

WARRANTY INFORMATION

In the U.S, General warrants its
instruments and accessories against
defects in material or workmanship for
14
one year from the date of purchase.
General will replace or repair the
defective unit, at its option, subject to
verification of the defect.
This warranty does not apply to defects
resulting from abuse, neglect, accident,
unauthorized repair, alteration, or
unreasonable use of the product.
Any implied warranties arising from the
sale of a General product, including but
not limited to implied warranties of
merchantability and fitness for a
particular purpose, are limited to the
above. General shall not be liable for loss
of use of the product or other incidental
or consequential damages, expenses, or
economic loss, or for any claim of such
damage, expenses, or economic loss.
State laws vary. The above limitations or
exclusions may not apply to you.
We encourage you to register your
product online. General will extend your
warranty an additional 60 days if you
register at
www.generaltools.com/ProductRegistry.
15