Specifications; Maintenance Tips - General PalmScope DCS950 Guide De L'utilisateur

8. Press the button to enlarge the
video frame. The first press of the
button enlarges the frame 50%,
corresponding to a zoom level of 1.5X.
"X 1.5" will appear in light blue at the
bottom right of the screen. Push the
button several times to zoom in closer
at a level of 2.0X, 2.5X, 3.0X, 3.5X and
4.0X. The next push of the
reverts to normal size (1X) viewing.
To power off The PalmScope, press and
hold the button for at least 3 seconds.
The PalmScope is designed to be
powered for several hours by the same
set of four "AAA" batteries. A
battery) icon will appear on-screen when
the total battery charge drops below an
operational threshold. To replace the
batteries, follow the procedure on
pages 6 and 7 of this manual.

SPECIFICATIONS

Display Size/Type: 2.7 in. (69mm)
diagonal TFT color LCD
Display Resolution: 320 x 240 pixels
Monitor Controls: 180° flip, 1X to 4X
zoom in 6 steps, brightness + and –
12
Camera Head Diameter: 9mm (0.35 in.)
Probe Length & Type: 2 ft. (0.6m)
flexible-obedient
Camera Field of View: 60°
Camera Depth of Field: 1 in. to 10 ft.
(25mm to 3m)
Camera Light Source: 4 adjustable-
brightness white LEDs
button
Impact Resistance: From height of 1m
(39 in.)
Probe/Camera Head Water & Dust
Resistance Level: IP67
Battery Life: >3 hours (typical)
Operating Temperature/Humidity: 32° to
(low
113°F (0° to 45°C) @ 5 to 95% RH
Dimensions: 5.4 x 2.9 x 1.5 in.
(136 x 73 x 39mm)
Weight of Grip: 9 oz. (250g)
Power Source: Four "AAA" batteries
(not included)

MAINTENANCE TIPS

• The camera at the tip of the probe is a
sensitive, sophisticated device. Do not
use the probe as a hammer or to clear
debris.
13