Warranty Information - General MMD5NP Mode D'emploi

WARRANTY INFORMATION

General Tools & Instruments' (General's) MMD5NP Pinless
LCD Moisture Meter is warranted to the original purchaser to
be free from defects in material and workmanship for a
period of one year. Subject to certain restrictions, General will
repair or replace this instrument if, after examination, the
company determines it to be defective in material or
workmanship. The warranty period begins on the date of
purchase. You are encouraged to register your product online.
General will extend your warranty an additional 60 days if you
register at www.generaltools.com/ProductRegistry.
This warranty does not apply to damages that General
determines to be from an attempted repair by non-authorized
personnel or misuse, alterations, normal wear and tear, or
accidental damage. The defective unit must be returned to
General Tools & Instruments or to a General-authorized
service center, freight prepaid and insured.
Acceptance of the exclusive repair and replacement remedies
described herein is a condition of the contract for purchase
of this product. In no event shall General be liable for any
incidental, special, consequential or punitive damages, or for
any cost, attorneys' fees, expenses, or losses alleged to be a
consequence of any damage due to failure of, or defect in any
product including, but not limited to, any claims for loss of
profits.
Register now at www.generaltools.com/ProductRegistry to
receive a 60-day extension to your warranty.
9