Setting The System - Dometic MWE7006 Mode D'emploi

MWE7006
11

Setting the system

See fig. d to fig. g
!
WARNING!
Incorrect settings can impair operational safety.
The control electronics have the following control elements:
No. in fig. e
1
2, 3
I
NOTE
• To save the settings, disengage and engage the reverse gear and
wait for 2 s.
• To cancel setting the parameters without saving your changes,
or to stop the entire setting process: refrain from pressing any
buttons for a while.
Restoring the factory settings
➤ Press the right-hand button for longer than 2 s to access programming mode.
➤ The display now shows 01.
➤ Press both buttons for longer than two seconds.
✓ The display shows F5.
EN
Designation
Display
F5
C5
Buttons for setting the system
Factory settings activated
Your own settings
Setting the system
11