Detection Range - Dometic MWE7006 Mode D'emploi

Detection range

10 Detection range
See fig. d
The detection range of the parking aid is divided into four zones:
• Zone 1
This zone is the first limit range. Small objects or those with poor reflective
characteristics may not be detected here.
• Zone 2
Nearly all objects in this zone are displayed.
• Zone 3
Virtually all objects are displayed in this zone, but some objects may end up in the
blind spot of the sensors.
• Stop zone (4)
If there are objects in this zone, the parking aid emits a continuous tone warning
you to stop.
Virtually all objects are displayed in this zone, but some objects may end up in
the blind spot of the sensors.
There must be no objects such as bicycle racks or spare wheels in the detection
range of the sensors, as this would result in an incorrect display.
The display of fixed objects, such as a trailer coupling or a part of the spare
wheel, can be suppressed (parameters 51, 52 and 53).
10
MWE7006
EN