Nibe SMS 40 Manuel Installateur page 20

GB
Command
?solar
?as
1) Accessories are required
2) Applies to F370 F470 and F750.
3) Applies to F1145/F1155 and F1245/F1255
4) Applies to F1345
5) Applies to VVM 310, VVM 320, VVM 325 and VVM 500
6) Applies to F750
7) Applies to SMO 40
Example
To check the selected operating mode, the following SMS message is sent: ?status
The command is answered with a status message.
20
Answer
indoor: nn
calcf:nn
DM: nn
Bin: nn
Bout: nn
hw: nn
pump: runs/off
BT53: nn
BT54: nn
BT55: nn
status: blocked/off/nn kW
5) 4)
/ nn (number of steps)
time factor: nn
- of which hot water: nn
Description
Indoor temperature. If the room temperature sensor is not in-
stalled/activated, the following appears -
Calculated flow line temperature
Degree minutes
Incoming brine temperature
Outgoing brine temperature
Hot water temp.
Status of charge pump for solar accessories
Solar panel temperature
Solar tank temperature, coil
Solar tank temperature, peak
2), 3),
Status of addition
Time factor on addition
Total run time hot water
3), 4)
3), 4)
1)
1)
1)
2+1)
2), 3), 4), 5), 7)
6)