Recalling Records - HoMedics BPA-2000-EU Mode D'emploi

IB-BPA2000-0912-01:Layout 1 09/01/2013 17:50 Page 10

Recalling records

1. Please press the "MEM" to show the recent record.
2. Press the "MEM" or "SET" to get the
record you want.
The number of the record,
date and time will be shown
accordingly.
CAUTION
The most recent record (1) is shown first. Each new measurement is assigned to the first (1) record. All other
records are pushed back one digit (e.g., 2 becomes 3, and so on), and the last record (60) is dropped from the
list.
Deleting your records
If you did not get the correct measurement,
you can delete all results using the
following steps.
1. When the device is off, hold "MEM" for 3
seconds. The flash display will show dEL
ALL.
2. Press "SET" to confirm deleting and the
monitor will turn off automatically.
3. If you do not want to delete the record,
press to cancel.
4. If there is no record the right display will
show.
MEM
UP
MEM
DOWN
SET
The current record is The month and day
shown
MEM
SET
10
The corresponding time
will show and alternate
with date.