How To Measure Blood Pressure; Recalling The Records - HoMedics BPW-1000-EU Manuel D'instructions

IB-BPW1000-0912-01_Layout 1 09/01/2013 13:01 Page 11

How to measure blood pressure

1. Press the "
" to turn on the monitor.
1.
When the monitor is turned on the monitor will adjust
itself to zero, inflate and will take your measurement
automatically.
1.
When the measurement is completed, systolic, diastolic
and pulse will be shown simultaneously on the LCD
screen. The measurement is then automatically
stored into the pre-designated memory zone.
2. When you have finished press "
within 1 minute.
NOTE
This monitor automatically switches o approximately 1 minute after last key operation.
To interrupt the measurement, simply press any key. The cu will de ate immediately
after a key is pressed.

Recalling the records

1. Press the "MEM" to show the first record.
2. Press the "MEM" or "SET" to get the record you want.
The date and time will be shown
accordingly.
" to turn off, otherwise it will turn off automatically
The corresponding
date. 5 January is
shown.
11
UP
DOWN
The corresponding
time will show and
alternate with date.