Cleaning Under Running Water; Storage - SilverCrest SLS 3 A1 Mode D'emploi

Cleaning under running water

1) Press the two release buttons 4 and pull the shaver
unit 2 upwards off the appliance .
2) Hold the shaving head 3 under running water .
Make sure that you hold the appliance so that the
shaving head 3 is angled downwards . This allows
the water to drain off and prevents it from getting into
the appliance .
CAUTION! MATERIAL DAMAGE!
Hold only the shaving head 3 under running water .
The shaver handset can be damaged irreparably if it
is held under running water .
3) Allow the shaving head 3 to dry .
4) Replace the shaver unit 2 on the shaver . Ensure that
it snaps into place and is seated firmly .

Storage

■ Always replace the long-hair trimmer attachment w
onto the shaver unit 2 when you are not using the
appliance . This protects the shaver unit 2 .
■ Store the cleaned and dried appliance and its
accessories in the supplied storage bag q .
■ Store everything in a clean, dust-free and dry place .
SLS 3 A1
GB │ IE │ NI │ 11 ■