Electrical Data; Led Source; Power Supply - Robert Juliat TIBO 535 Manuel

3.2

Electrical data

3.2.1 LED source

Do not touch the surface of the LED source
(no contact with your hands or any tools).
• Do not put compressed air directly on the source.
• Contact a certified RJ distributor in case of residuals or other objects located
on the surface of the LED source.

3.2.2 Power Supply

CW
NW 90 —> 264 V
WW
VW 90 —> 264 V
Daisy chain (with delivered power cable):
Voltage Frequency
47-63 Hz
47-63 Hz
• Class 1 product. This luminaire must be grounded.
• Must be connected directly to AC power. Do not connect to dimmer power.
• Automatic power detection.
• 4A breaker.
• Daisy chain: maximum of 35 units (230V) / 20 units (120V)
Power supply
Input power
0.42 A / 95 W @ 230V
0.8 A / 95 W @ 120V
0.95 A / 95 W @ 100V
Max. 1.2 A
Standby mode: 7 W
0.17 A / 36 W @ 230V
0.3 A / 36 W @ 120V
0.36 A / 36 W @ 100V
Max. 0.38 A
Standby mode: 7 W
EN - 6 -
Connectors
Neutrik® powerCON TRUE1
ref. NAC3PX (max. 20A)
Neutrik® powerCON TRUE1
ref. NAC3PX (max. 20A)
Maximum:
35 units (230V)
20 units (120V)
EN