Daily Use; Activating And Deactivating; Powerboost - ZANKER KITN323K Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Display
+ digit
/
/
OptiHeat Control (3 step Residual heat indicator)
Warning!
burns from residual heat.
The indicators show the level of the residual heat for the
cooking zones you are currently using. The indicators

Daily use

Warning! Refer to Safety chapters.

Activating and deactivating

Touch
for 1 second to activate or deactivate the hob.
Automatic Switch Off
The function deactivates the hob automatically if:
all cooking zones are deactivated,
you do not set the heat setting after you activate the
hob,
you spill something or put something on the control
panel for more than 10 seconds (a pan, a cloth,
etc.). An acoustic signal sounds and the hob
deactivates. Remove the object or clean the control
panel.
the hob gets too hot (e.g. when a saucepan boils
dry). Let the cooking zone cool down before you use
the hob again.
you use incorrect cookware. The symbol
on and the cooking zone deactivates automatically
after 2 minutes.
you do not deactivate a cooking zone or change the
heat setting. After some time
hob deactivates.
The relation between the heat setting and the time
after which the hob deactivates:
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / residual
heat.
Lock / Child Safety Device operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off operates.
/
/
There is a risk of
comes on and the
Description
may also come on for the neighbouring cooking zones
even if you are not using them.
The induction cooking zones produce the heat
necessary for the cooking process directly in the bottom
of the cookware. The glass ceramic is heated by the
heat of the cookware.
Heat setting
, 1 - 2
3 - 4
5
6 - 9
The heat setting
Touch
to increase the heat setting. Touch
decrease the heat setting. Touch
same time to deactivate the cooking zone.

PowerBoost

This function makes more power available to the
induction cooking zones. The function can be activated
comes
for the induction cooking zone only for a limited period
of time. After this time the induction cooking zone
automatically sets back to the highest heat setting.
Refer to "Technical data" chapter.
To activate the function for a cooking zone: touch
.
comes on.
The hob deactivates af-
ter
6 hours
5 hours
4 hours
1.5 hour
to
and
at the
25

Publicité

Table des Matières
loading

Table des Matières