Reset And Update Of Smartrail; Fault Conditions - Roco smartRail Manuel D'utilisation

Operation on touch-panel
In the future, analogue locomotives will also
be able to run on smartRail. A correspon-
ding fi rmware update is being developed; it
will probably be available for free at the App
Store and at Google Play as of 2013.
40
smartRail-Gebrauchsanleitung_19.11.indd 40

1.5 Reset and update of smartRail

If smartRail does not function faultlessly, please reset the integrated Z21 digital command centre
to the factory settings:
" "
1. Hold the button down for 5 seconds. The LED begins to blink blue.
After that, the factory settings of smartRail have been reset. If the digital system still does not
2.
react faultlessly, please ask your specialised dealer for help.
When your Smartphone or your tablet PC is connected to the internet, you can look for software
updates for your apps and for the Z21 fi rmware integrated in smartRail at the App Store and at
" "
Google Play in the area Updates

1.6 Fault conditions

Short circuit: Function keys and arrow keys remain dark white. The
▶
Sensor error due to contact interruption or due to locomotives that are too short and positioned
▶
too closely to the sensor or locomotives that cannot be controlled: All keys except the on / off
" "
switch turn off . The key blinks red.
Limited touch operation: If the
▶
locomotive.
.
" "
key glows pale red, the scanning procedure did not fi nd a
" "
key blinks red.
19.11.2012 11:03:56