Touch-Panel And Connections - Roco smartRail Manuel D'utilisation

Touch panel
Top side
Connections
Bottom side
smartRail-Gebrauchsanleitung_19.11.indd 37
Infrared 3. Conductor for
AC models Stationary loop rail
sensor
F1 F2 F3 F4
Front light Thrust left
On / off Functions
switch
1-4
Infrared
sensor
Thrust right
Stand Slider
DC power supply
X-bus
Touch panel and Connections
LED overview
Key " "
Blue: Standby
▶
White: On
▶
Keys F1-F4, " "
Dark: Function off
▶
Light: Function on
▶
Key " "
Blinks red for a long time with
▶
short intervals: Please set the
locomotive on the rails.
Glows red permanently: The
▶
locomotive was measured
successfully. Search for the loco-
motive address can be started.
Scanning is indicated by sequen-
tial light of the function keys.
Glows pale red: No locomoti-
▶
ve was found in the scanning
process.
Glows white: Locomotive stop
▶
Blink red: Short circuit or sensor
▶
interruption. Reactivation via
" " key.
37
19.11.2012 11:03:55